Standard mounting

The standard mounting option allows you to hang up your Wall Art easily and with little effort. They only need to be stuck onto the back.

Available for: Metal Print, Brushed Metal Print, Acrylic, GalleryPrint, PVC foam board

Features

• Not visible from the front
• Standard mounts and wall spacers are included with your order and require assembly
• Only suitable for indoor use
• For limited sizes only
• Nails or screws are not included
• Separation: 0.6 cm from the wall
• Each mounting plate is 70 x 70 mm and approximately weighs 39.4 g.
• Load capacity: 3 kg per mounting plate

Available to order separately: Yes, you can order individual mountings in the Accessories section of our webshop.

Quantity

Depending on the size selected, the following number of Standard mountings will be required and delivered:

• 10 x 10 to 20 x 20: 1 Standard mounting
• bigger than 20 x 20: 2 Standard mountings
• bigger than 30 x 120: 3 Standard mountings
• bigger than 40 x 160: 4 Standard mountings

Assembly instructions

Materials Required:

• Your Wall Art
• Standard mounting
• Transparent buffers
• A pencil
• A level (optional, but useful)
• A tape measure
• Two nails or screws for wall installation (consider the weight of the frame and the wall material when choosing)
• A screwdriver or hammer, according to your chosen wall fasteners
• A clean cloth or cleaning solution

Do not use string or wires to hang your Wall Art with this type of mounting, since it will affect its stability.

1. Before applying the mounts, ensure the surface on the back of your Wall Art is clean. Use a dry cloth or cleaning solution if necessary.
2. Peel off the protective foil attached to the standard mounts. Attach the mounts to the back of your Wall Art, spacing them as desired. Ensure they’re placed equidistant from the top of your Wall Art to maintain balance when hanging. Press down on each mount for approximately 10 seconds. Wait half an hour for an extra strong bond.
3. Glue the transparent elastic buffers onto the back of your Wall Art as spacers. These will help keep your art level and protect your wall from scratches.
4. Measure the distance between the two mounts. Decide where you want your Wall Art to hang, and mark the spot lightly with a pencil where you want the wall art to be.
5. Mark the two spots where the screws or nails will go into the wall. This is a good moment to use your level and ensure the two marks are level.
6. Using a hammer or screwdriver, carefully install the nails or screws at the spots you marked. Leave a small portion protruding from the wall for the mounts to hang on.
7. Align the mounts on the back of the Wall Art with the screws or nails on the wall, and gently hang your Wall Art. Once the Wall Art is hanging, step back and look at it from a few different angles to make sure it’s straight and at the desired height. If needed, adjust the nails or screws to change the angle or height of the piece.

Congratulations your Wall Art is now hanging on the wall.